Case 445CT Front Idler | OEM 87480418 | CTL Replacement Part
IPX GLOBAL · PARTS COVER12 MONTHS WARRANTYRollers · Idlers · Sprockets
IPX Global undercarriage parts warranty
New rollers, idlers and sprockets purchased from IPX Global are covered against defects in materials and workmanship for 12 months from the purchase date.
IPX Global will replace a part with an approved manufacturing defect during this period, subject to assessment and verification of the claim.
Normal wear, incorrect installation, misuse, machine faults, improper tensioning, impact damage and use outside the intended application are excluded.
To make a claim, contact IPX with your order number, purchase date, part number, machine details and clear photographs of the fault. Keep the part available for inspection and obtain approval before returning it. Contact IPX to confirm freight arrangements.
Non-defective returns remain subject to the separate returns policy. Rubber tracks have their own warranty terms. Applicable statutory rights are unaffected.
Contact IPX about a claim →Description
Replacement front idler for Case 445CT compact track loaders. It cross-references OEM number 87480418. This undercarriage component guides the track, supports alignment and helps maintain consistent track tension during operation.
Correct component dimensions and mounting details are essential for dependable track alignment and service life. Match the machine model, OEM reference and existing part configuration before installation.
Fitment Information
Confirm the machine model and OEM number before ordering. Also compare the mounting arrangement and dimensions with the part currently fitted, as undercarriage configurations can vary.
Delivery
Enter your ZIP code to see your delivery estimate.
In-stock orders placed before 2 pm Eastern, Monday–Friday, dispatch the same business day. Later orders dispatch the next business day. Weekends and public holidays are excluded.
These are estimated transit times after dispatch. Carrier delays may affect arrival. Delivery is available across the continental USA. Shipping charges, if applicable, are shown at checkout.
Specifications
- Machine make: Case
- Machine model: 445CT
- Part type: Front Idler
- IPX stock code: ID-Y003N009-F
- Machine type: Compact track loader
OEM cross-references: CA935, 87480418
OEM numbers identify replacement references; they do not identify the manufacturer of this aftermarket product.
Confirm your machine model, OEM reference and existing part dimensions before ordering. Contact our team if you need help checking fitment.
Warranty & Returns
30-day returns
Request approval within 30 days of delivery. Eligible items must be unused, uninstalled, in original condition with intact original packaging and proof of purchase. Special orders and final-sale items are excluded.
For change-of-mind or incorrect-order returns, you pay return shipping and a 20% restocking fee may apply. Report damaged, defective or incorrect deliveries within 48 hours.
IPX Global undercarriage parts warranty
New rollers, idlers and sprockets purchased from IPX Global are covered against defects in materials and workmanship for 12 months from the purchase date.
IPX Global will replace a part with an approved manufacturing defect during this period, subject to assessment and verification of the claim.
Normal wear, incorrect installation, misuse, machine faults, improper tensioning, impact damage and use outside the intended application are excluded.
To make a claim, contact IPX with your order number, purchase date, part number, machine details and clear photographs of the fault. Keep the part available for inspection and obtain approval before returning it. Contact IPX to confirm freight arrangements.
Non-defective returns remain subject to the separate returns policy. Rubber tracks have their own warranty terms. Applicable statutory rights are unaffected.
How did it fit your machine? Share your machine make and model, your experience fitting the part, and a photo if you can.
Questions about this front idler
Practical guidance for Case 445CT Front Idler. Use the specifications above for the recorded dimensions and references.
What should I inspect around the front idler before replacement?
Check for uneven running-surface wear, bearing play, leakage and damage around the idler guides. Inspect the tensioning assembly and track alignment as directed in the machine service manual; a replacement idler alone may not resolve a damaged guide or tensioner.
Do the OEM references mean this is a genuine machine-manufacturer part?
No. This is an aftermarket listing sold by IPX Global. The OEM references help identify the part being replaced; they are not a claim of manufacture or endorsement by the machine brand. If an OEM number has been superseded, confirm the replacement reference before ordering.
Does this front idler include the tensioner assembly?
An idler listing does not automatically include the tensioner, recoil spring, mounting hardware or other adjacent parts. Use the listed specifications and supplied images to identify the item, and ask IPX Global to confirm the contents before ordering if the assembly boundary is unclear.
Can I use a rear idler in the front position?
Do not interchange front and rear idlers based on appearance. Their dimensions, mounting arrangements and track-contact profiles can differ. Use the correct position and part reference for the machine configuration.
What should I check when the replacement arrives?
Before fitting, compare the delivered item with the listing and the removed component. Check the stock code, mounting arrangement and any stated dimensions. Keep the packaging and contact IPX Global if anything differs; do not install a part that has not been confirmed as suitable.
Explore related collections
Related machine listings
These linked listings are recorded against this product. Confirm the machine configuration and dimensions before ordering.