Case 440CT Rear Idler | OEM 87480413 | CTL Replacement Part
IPX GLOBAL · PARTS COVER12 MONTHS WARRANTYRollers · Idlers · Sprockets
IPX Global undercarriage parts warranty
New rollers, idlers and sprockets purchased from IPX Global are covered against defects in materials and workmanship for 12 months from the purchase date.
IPX Global will replace a part with an approved manufacturing defect during this period, subject to assessment and verification of the claim.
Normal wear, incorrect installation, misuse, machine faults, improper tensioning, impact damage and use outside the intended application are excluded.
To make a claim, contact IPX with your order number, purchase date, part number, machine details and clear photographs of the fault. Keep the part available for inspection and obtain approval before returning it. Contact IPX to confirm freight arrangements.
Non-defective returns remain subject to the separate returns policy. Rubber tracks have their own warranty terms. Applicable statutory rights are unaffected.
Contact IPX about a claim →Description
Replacement rear idler for Case 440CT compact track loaders. It cross-references OEM number 87480413. This undercarriage component supports track guidance, alignment and consistent tension at the rear of the undercarriage.
Correct component dimensions and mounting details are essential for dependable track alignment and service life. Match the machine model, OEM reference and existing part configuration before installation.
Fitment Information
Confirm the machine model and OEM number before ordering. Also compare the mounting arrangement and dimensions with the part currently fitted, as undercarriage configurations can vary.
Delivery
Enter your ZIP code to see your delivery estimate.
In-stock orders placed before 2 pm Eastern, Monday–Friday, dispatch the same business day. Later orders dispatch the next business day. Weekends and public holidays are excluded.
These are estimated transit times after dispatch. Carrier delays may affect arrival. Delivery is available across the continental USA. Shipping charges, if applicable, are shown at checkout.
Specifications
- Machine make: Case
- Machine model: 440CT
- Part type: Rear Idler
- IPX stock code: ID-Y003N008-R
- Machine type: Compact track loader
OEM cross-references: CA928, 87480413, 87535299, 87447230, 47378988
OEM numbers identify replacement references; they do not identify the manufacturer of this aftermarket product.
Confirm your machine model, OEM reference and existing part dimensions before ordering. Contact our team if you need help checking fitment.
Warranty & Returns
30-day returns
Request approval within 30 days of delivery. Eligible items must be unused, uninstalled, in original condition with intact original packaging and proof of purchase. Special orders and final-sale items are excluded.
For change-of-mind or incorrect-order returns, you pay return shipping and a 20% restocking fee may apply. Report damaged, defective or incorrect deliveries within 48 hours.
IPX Global undercarriage parts warranty
New rollers, idlers and sprockets purchased from IPX Global are covered against defects in materials and workmanship for 12 months from the purchase date.
IPX Global will replace a part with an approved manufacturing defect during this period, subject to assessment and verification of the claim.
Normal wear, incorrect installation, misuse, machine faults, improper tensioning, impact damage and use outside the intended application are excluded.
To make a claim, contact IPX with your order number, purchase date, part number, machine details and clear photographs of the fault. Keep the part available for inspection and obtain approval before returning it. Contact IPX to confirm freight arrangements.
Non-defective returns remain subject to the separate returns policy. Rubber tracks have their own warranty terms. Applicable statutory rights are unaffected.
How did it fit your machine? Share your machine make and model, your experience fitting the part, and a photo if you can.
Questions about this rear idler
Practical guidance for Case 440CT Rear Idler. Use the specifications above for the recorded dimensions and references.
What signs should I investigate before replacing this rear idler?
Check for uneven surface wear, bearing play, leakage or damage that affects smooth rotation. Inspect the track path and adjoining rollers as well. Diagnose the source of abnormal wear before installing the replacement.
Do the OEM references mean this is a genuine machine-manufacturer part?
No. This is an aftermarket listing sold by IPX Global. The OEM references help identify the part being replaced; they are not a claim of manufacture or endorsement by the machine brand. If an OEM number has been superseded, confirm the replacement reference before ordering.
Can front and rear idlers be swapped?
Do not swap them based on a similar appearance. Front and rear positions can use different profiles, bearings and mounting arrangements. Match the position and part reference specified for the exact undercarriage configuration.
Must both rear idlers be replaced at the same time?
Inspect both sides, but do not assume that the other idler is either serviceable or due for replacement. Use the manufacturer’s wear limits and the condition of the bearings, surfaces and track alignment to decide what requires attention.
What should I check when the replacement arrives?
Before fitting, compare the delivered item with the listing and the removed component. Check the stock code, mounting arrangement and any stated dimensions. Keep the packaging and contact IPX Global if anything differs; do not install a part that has not been confirmed as suitable.
Explore related collections
Related machine listings
These linked listings are recorded against this product. Confirm the machine configuration and dimensions before ordering.