Takeuchi track orders should preserve the complete TL designation. IPX’s TL12R2 and TL12V2 examples are listed at 450 × 86 × 60, with B and N tread options. The TL10V2 C-lug example is listed at 400 × 86 × 52.
Shop Takeuchi rubber tracks or use the examples below to prepare your replacement-track enquiry.
Retain R2 or V2 instead of ordering by TL12 alone
The TL12R2 and TL12V2 have separately named product pages even where the displayed dimensions match. Use the page for the actual machine and check its serial information and fitted track. A shared TL12 prefix is not a reason to omit the rest of the model from the enquiry.
There are two different comparisons in the table: B versus N tread for the named TL12 applications, and a different nominal size for the TL10V2 example. Keeping those comparisons separate helps prevent a tread preference from being mistaken for a fitment decision. Confirm the complete specification before comparing delivery or price.
Takeuchi rubber track examples from the IPX catalogue
These are selected aftermarket listings, not a complete fitment chart or a guarantee of current stock. Dimensions are shown as width in millimeters × pitch in millimeters × link count. Open the product page for the current specification and availability.
| Listed machine / product | Track size | Listed tread |
|---|---|---|
| Takeuchi TL12V2 | 450 × 86 × 60 | N Lug |
| Takeuchi TL12R2 | 450 × 86 × 60 | N Lug |
| Takeuchi TL12V2 | 450 × 86 × 60 | B Lug |
| Takeuchi TL12R2 | 450 × 86 × 60 | B Lug |
| Takeuchi TL10V2 | 400 × 86 × 52 | C Lug |
Confirm the track before comparing tread
Match the complete model and serial identification, track width, pitch, link count and internal guide configuration. If the marking is worn, use our rubber track measurement guide to gather the details for a fitment enquiry. Do not infer compatibility from a matching width or an exterior photograph alone.
Once fitment is established, compare the listed tread choices against your usual surfaces and tasks. Our AC, B, C, N and Z pattern guide explains the options. A pattern shown for one model is not a promise that the same option is available for every Takeuchi machine.
Plan the replacement order
The selected products are listed individually. Specify one track or a quantity of two for a pair, and confirm availability before scheduling downtime. Include the product link, machine identification and a photograph of the existing track marking in your enquiry.
For a damaged or unevenly worn track, arrange an inspection of the surrounding undercarriage before fitting the replacement. Read when to replace rubber tracks for the warning signs to discuss. Use the exact machine’s service instructions for installation and tension settings.
Frequently asked questions
Can I order using only the name Takeuchi TL12?
Use the complete model, such as TL12R2 or TL12V2, with serial information and the existing track marking. Retain the full designation on the order.
Are these original Takeuchi tracks?
These IPX listings are aftermarket replacements. Machine names identify the listed applications; they do not imply that the tracks are manufactured or endorsed by Takeuchi.