IPX’s selected New Holland C-series and LT-series listings include several 450 × 86 × 55 rubber tracks. A repeated size is useful when comparing products, but the full machine designation should remain on the order so the intended application is clear.
Shop New Holland rubber tracks or use the examples below to prepare your replacement-track enquiry.
Keep LT, C and the B suffix where shown
The examples below include LT190B, LT185B, C238 and C232 listings. Do not reduce an LT185B enquiry to 185 or assume that a C-series result is an automatic substitute. Compare the machine plate, track marking and internal guide arrangement against the named product page.
The LT185B examples show Z and N tread choices at the same nominal dimensions. Treat that as a choice to discuss after confirming the application.
New Holland rubber track examples from the IPX catalogue
These are selected aftermarket listings, not a complete fitment chart or a guarantee of current stock. Dimensions are shown as width in millimeters × pitch in millimeters × link count. Open the product page for the current specification and availability.
| Listed machine / product | Track size | Listed tread |
|---|---|---|
| New Holland LT190B | 450 × 86 × 55 | Z Lug |
| New Holland LT185B | 450 × 86 × 55 | Z Lug |
| New Holland C238 | 450 × 86 × 55 | Z Lug |
| New Holland C232 | 450 × 86 × 55 | Z Lug |
| New Holland LT185B | 450 × 86 × 55 | N Lug |
Confirm the track before comparing tread
Match the complete model and serial identification, track width, pitch, link count and internal guide configuration. If the marking is worn, use our rubber track measurement guide to gather the details for a fitment enquiry. Do not infer compatibility from a matching width or an exterior photograph alone.
Once fitment is established, compare the listed tread choices against your usual surfaces and tasks. Our AC, B, C, N and Z pattern guide explains the options. A pattern shown for one model is not a promise that the same option is available for every New Holland machine.
Plan the replacement order
The selected products are listed individually. Specify one track or a quantity of two for a pair, and confirm availability before scheduling downtime. Include the product link, machine identification and a photograph of the existing track marking in your enquiry.
For a damaged or unevenly worn track, arrange an inspection of the surrounding undercarriage before fitting the replacement. Read when to replace rubber tracks for the warning signs to discuss. Use the exact machine’s service instructions for installation and tension settings.
Frequently asked questions
Does a shared 450 × 86 × 55 size prove interchangeability?
No. The full machine application and internal track configuration also need to match. Use the individually named listings as the starting point.
Are these original New Holland tracks?
These IPX listings are aftermarket replacements. Machine names identify the listed applications; they do not imply that the tracks are manufactured or endorsed by New Holland.