The Kubota SVL name covers more than one rubber track specification. In the IPX examples below, the SVL75 listings use 400 × 86 × 52, while the SVL97-2 listings use 450 × 86 × 58. Start with that model-and-size comparison before deciding between tread patterns.
Shop Kubota rubber tracks or use the examples below to prepare your replacement-track enquiry.
Preserve the complete SVL designation
Include the generation and any suffix shown on the machine plate. IPX has separately named SVL97-2 and SVL97-2C listings, so do not shorten either one to SVL97 when asking for a fitment check. An existing track marking and machine serial number provide more useful evidence than a model nickname.
The selected SVL75 pages offer B and C patterns at the same nominal size. The selected SVL97-2 pages show Z and N patterns at its listed size. Compare patterns within the correct application, then describe the surfaces and jobs you need the machine to handle. Do not use a preferred pattern as a reason to switch to another model’s dimensions.
Kubota rubber track examples from the IPX catalogue
These are selected aftermarket listings, not a complete fitment chart or a guarantee of current stock. Dimensions are shown as width in millimeters × pitch in millimeters × link count. Open the product page for the current specification and availability.
| Listed machine / product | Track size | Listed tread |
|---|---|---|
| Kubota SVL97-2 | 450 × 86 × 58 | Z Lug |
| Kubota SVL97-2 | 450 × 86 × 58 | N Lug |
| Kubota SVL75 | 400 × 86 × 52 | B Lug |
| Kubota SVL75 | 400 × 86 × 52 | C Lug |
Confirm the track before comparing tread
Match the complete model and serial identification, track width, pitch, link count and internal guide configuration. If the marking is worn, use our rubber track measurement guide to gather the details for a fitment enquiry. Do not infer compatibility from a matching width or an exterior photograph alone.
Once fitment is established, compare the listed tread choices against your usual surfaces and tasks. Our AC, B, C, N and Z pattern guide explains the options. A pattern shown for one model is not a promise that the same option is available for every Kubota machine.
Plan the replacement order
The selected products are listed individually. Specify one track or a quantity of two for a pair, and confirm availability before scheduling downtime. Include the product link, machine identification and a photograph of the existing track marking in your enquiry.
For a damaged or unevenly worn track, arrange an inspection of the surrounding undercarriage before fitting the replacement. Read when to replace rubber tracks for the warning signs to discuss. Use the exact machine’s service instructions for installation and tension settings.
Frequently asked questions
Should I choose the Kubota tread pattern before the track size?
Confirm the application, dimensions and guide configuration first. Then compare the patterns actually offered for that specification.
Are these original Kubota tracks?
These IPX listings are aftermarket replacements. Machine names identify the listed applications; they do not imply that the tracks are manufactured or endorsed by Kubota.