John Deere rubber track shopping becomes clearer when model generations and track dimensions are kept together. IPX’s selected 331G and 333G Z-lug listings use 450 × 86 × 58, while the 325G B-lug example uses 400 × 86 × 52.
Shop John Deere rubber tracks or use the examples below to prepare your replacement-track enquiry.
Use the complete model and machine PIN
Record the machine PIN with the full designation before comparing replacements. The examples here also include a 323E listing, so an E or G suffix should not disappear from an enquiry or purchase order. A nearby model result is useful for browsing, but it is not confirmation that the track belongs on your machine.
For a mixed John Deere fleet, group quotations by machine rather than by brand alone. The 325G example and the larger nominal dimensions shown for the 331G and 333G require separate order lines. Keep the selected tread and quantity with each line so a later reorder does not rely on a remembered size.
John Deere rubber track examples from the IPX catalogue
These are selected aftermarket listings, not a complete fitment chart or a guarantee of current stock. Dimensions are shown as width in millimeters × pitch in millimeters × link count. Open the product page for the current specification and availability.
| Listed machine / product | Track size | Listed tread |
|---|---|---|
| John Deere 331G | 450 × 86 × 58 | Z Lug |
| John Deere 333G | 450 × 86 × 58 | Z Lug |
| John Deere 325G | 400 × 86 × 52 | B Lug |
| John Deere 323E | 400 × 86 × 52 | B Lug |
Confirm the track before comparing tread
Match the complete model and serial identification, track width, pitch, link count and internal guide configuration. If the marking is worn, use our rubber track measurement guide to gather the details for a fitment enquiry. Do not infer compatibility from a matching width or an exterior photograph alone.
Once fitment is established, compare the listed tread choices against your usual surfaces and tasks. Our AC, B, C, N and Z pattern guide explains the options. A pattern shown for one model is not a promise that the same option is available for every John Deere machine.
Plan the replacement order
The selected products are listed individually. Specify one track or a quantity of two for a pair, and confirm availability before scheduling downtime. Include the product link, machine identification and a photograph of the existing track marking in your enquiry.
For a damaged or unevenly worn track, arrange an inspection of the surrounding undercarriage before fitting the replacement. Read when to replace rubber tracks for the warning signs to discuss. Use the exact machine’s service instructions for installation and tension settings.
Frequently asked questions
Are the 325G and 333G examples the same track size?
No. The selected IPX listings show 400 × 86 × 52 for the 325G and 450 × 86 × 58 for the 333G. Verify your own machine configuration before ordering.
Are these original John Deere tracks?
These IPX listings are aftermarket replacements. Machine names identify the listed applications; they do not imply that the tracks are manufactured or endorsed by John Deere.