Find the right IHI CTL replacement parts using machine identification, OEM references and fitment checks, with a real IPX catalogue example.
Treat the CL35 track specification as a complete record
For an IHI track replacement, start with the full machine identity and the marking on the fitted track. Older machine paperwork can be incomplete, so photographs of the identification plate, outer tread and internal guide profile are particularly useful.
What to compare before ordering
The catalogue example below is a CL35 track listing. Its 400 × 86 × 52 dimensions describe width, pitch and link count; they do not establish fitment for another IHI machine. Confirm the internal configuration and application before ordering.
A real IPX catalogue example
IPX lists IHI CL35 Rubber Track 400x86x52. This is an aftermarket replacement listing and an example of the details to check, not proof of fitment for every machine in the same family. Read its current specification and confirm your serial range and fitted configuration with the supplier.
Build a useful enquiry
Send a clear identification-plate photograph, the complete model and serial number, the original part or track marking and photographs showing how it is fitted. Include the quantity needed and any known modifications. If a part has failed unusually early, describe the symptom and ask for the surrounding undercarriage to be assessed.
Check the delivery before installation
Compare the item, labels and assembly contents with the confirmed order before fitting. Keep packaging and photographs if anything differs. Follow the machine’s service procedure for installation; this identification guide does not replace the model-specific repair manual.
Browse rubber tracks or find parts by machine.
Frequently asked questions
What identifies the correct IHI replacement?
Use the complete machine model and serial number together with the verified OEM reference or full track specification. Compare the fitted configuration as well.
Does this guide confirm every IHI model is stocked?
No. Check the current product listing and availability. A brand guide explains identification and does not promise stock for every model.
Is track width enough to confirm fitment?
No. Match pitch, link count, internal guide configuration and the approved machine application too.
Are these original manufacturer parts?
The linked IPX example is an aftermarket replacement. OEM references and brand names identify the intended application and do not imply manufacturer endorsement.
What if my existing part differs from the listing?
Send the supplier photographs and machine details before ordering. Resolve the discrepancy rather than assuming the difference is cosmetic.