IPX lists rubber tracks for Gehl RT250, RT255 and VT320 applications in both Z and N patterns. The examples below share nominal dimensions of 450 × 86 × 58, making them useful for comparing tread options while keeping the individual machine application visible.
Shop Gehl rubber tracks or use the examples below to prepare your replacement-track enquiry.
Compare RT and VT applications explicitly
A shared size does not turn the RT250, RT255 and VT320 into a single fitment entry. Select the page that names your machine, check the complete marking on the fitted track, and confirm the internal guide configuration. Preserve RT or VT in the enquiry rather than sending only the number.
If you are comparing Z and N quotations, ask for the exact product link with each quote. Record the expected ground surfaces, the amount of travel between work areas and the tread already fitted on the other side. Those details make a pattern discussion more useful than asking for the best Gehl track without describing the work.
Gehl rubber track examples from the IPX catalogue
These are selected aftermarket listings, not a complete fitment chart or a guarantee of current stock. Dimensions are shown as width in millimeters × pitch in millimeters × link count. Open the product page for the current specification and availability.
| Listed machine / product | Track size | Listed tread |
|---|---|---|
| Gehl VT320 | 450 × 86 × 58 | Z Lug |
| Gehl RT255 | 450 × 86 × 58 | Z Lug |
| Gehl RT250 | 450 × 86 × 58 | Z Lug |
| Gehl VT320 | 450 × 86 × 58 | N Lug |
Confirm the track before comparing tread
Match the complete model and serial identification, track width, pitch, link count and internal guide configuration. If the marking is worn, use our rubber track measurement guide to gather the details for a fitment enquiry. Do not infer compatibility from a matching width or an exterior photograph alone.
Once fitment is established, compare the listed tread choices against your usual surfaces and tasks. Our AC, B, C, N and Z pattern guide explains the options. A pattern shown for one model is not a promise that the same option is available for every Gehl machine.
Plan the replacement order
The selected products are listed individually. Specify one track or a quantity of two for a pair, and confirm availability before scheduling downtime. Include the product link, machine identification and a photograph of the existing track marking in your enquiry.
For a damaged or unevenly worn track, arrange an inspection of the surrounding undercarriage before fitting the replacement. Read when to replace rubber tracks for the warning signs to discuss. Use the exact machine’s service instructions for installation and tension settings.
Frequently asked questions
Are the Gehl Z and N examples different sizes?
The examples selected here are all listed at 450 × 86 × 58. Their tread patterns differ; compatibility still needs to be confirmed for the named machine.
Are these original Gehl tracks?
These IPX listings are aftermarket replacements. Machine names identify the listed applications; they do not imply that the tracks are manufactured or endorsed by Gehl.