Case rubber track listings span different model designations and track sizes. A search for Case tracks can return both 450 mm and 320 mm examples, so it helps to narrow the order by the complete model before comparing price or tread.
Shop Case rubber tracks or use the examples below to prepare your replacement-track enquiry.
Keep CT, TR and model suffixes on the order
The 450CT and TR320 examples below are listed at 450 × 86 × 55, while the TR270B example is listed at 320 × 86 × 50. These are catalogue examples for their named applications, not a size rule for all CT or TR machines. Keep the B suffix when identifying a TR270B and compare the fitted track marking with the product page.
The TR320 listings also illustrate a different kind of choice: Z and N tread options at the same nominal dimensions. That is a pattern comparison within a listed application. It should happen after the machine and internal guide configuration have been confirmed, rather than being used to decide whether an otherwise different track will fit.
Case rubber track examples from the IPX catalogue
These are selected aftermarket listings, not a complete fitment chart or a guarantee of current stock. Dimensions are shown as width in millimeters × pitch in millimeters × link count. Open the product page for the current specification and availability.
| Listed machine / product | Track size | Listed tread |
|---|---|---|
| Case 450CT | 450 × 86 × 55 | Z Lug |
| Case TR320 | 450 × 86 × 55 | Z Lug |
| Case TR320 | 450 × 86 × 55 | N Lug |
| Case TR270B | 320 × 86 × 50 | AC Lug |
Confirm the track before comparing tread
Match the complete model and serial identification, track width, pitch, link count and internal guide configuration. If the marking is worn, use our rubber track measurement guide to gather the details for a fitment enquiry. Do not infer compatibility from a matching width or an exterior photograph alone.
Once fitment is established, compare the listed tread choices against your usual surfaces and tasks. Our AC, B, C, N and Z pattern guide explains the options. A pattern shown for one model is not a promise that the same option is available for every Case machine.
Plan the replacement order
The selected products are listed individually. Specify one track or a quantity of two for a pair, and confirm availability before scheduling downtime. Include the product link, machine identification and a photograph of the existing track marking in your enquiry.
For a damaged or unevenly worn track, arrange an inspection of the surrounding undercarriage before fitting the replacement. Read when to replace rubber tracks for the warning signs to discuss. Use the exact machine’s service instructions for installation and tension settings.
Frequently asked questions
Can I order a Case track using the TR number alone?
Use the complete designation, including any suffix, plus the serial number and existing track marking. A shortened model search is only a starting point.
Are these original Case tracks?
These IPX listings are aftermarket replacements. Machine names identify the listed applications; they do not imply that the tracks are manufactured or endorsed by Case.